Clarke 6500560 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 7
Sander Clarke 6500560 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke 6500560 13 sayfaları. 550w buffer/polisher
Sayfayı Yazdır
ASSEMBLY
MOUNTING THE MACHINE
1. Bolt the buffer/polisher to a
workbench using the securing holes
shown.
• Check that all assembly nuts
and bolts are secure before
turning the machine on.
FITTING BUFFING/POLISHING PADS
1. Place the spacer over the shaft.
2. Place the polishing mop between the washers and secure with the retaining
nut, hand tight.
• The shaft threaded ends are handed LH and RH.
3. Tighten the nuts enough to grip without crushing the buffing/polishing pad.
NOTE: Wheel rotation, in use, will tighten the retaining nut.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7