aleen VME Office Manual Instalasi dan Pemrograman - Halaman 17

Jelajahi secara online atau unduh pdf Manual Instalasi dan Pemrograman untuk Pesan suara aleen VME Office. aleen VME Office 20 halaman.

Halaman Cetak

Feature

Description

The Administrator can increase the number of ports and

recording time by adding a four-port expansion module to the

basic VME Office unit.

Programming

The Administrator can program the VME Office using:

• A computer running the Voice Mail Utility Program. In this

case, it is highly recommended to save the configuration

files for each

• Via a modem connection.

• Touch-tone telephone using DTMF Codes.

Integration

The Administrator can integrate the VME Office with the PBX

with Your

using:

PBX

• In-band DTMF Protocol. This type of integration is

achieved by setting up the communication protocol of the

PBX and the VME Office unit (answering a call,

transferring a call, recalling as a result of a Busy or No

Answer condition, etc.).

• SMDI Integration via the RS-232 serial port. This type of

integration must be specifically developed for each type of

PBX.

Disconnection

Some PBXs can notify the VME Office through the line

interface when a call is terminated using Loop Disconnect,

Methods

DTMF Codes or the Busy and Disconnect Cadence. When the

VME Office detects this situation, the line is disconnected and

the unit is ready to receive another call.

The VME Office automatically notifies the mailbox owner of

Message

Notification

new messages. Notification may be local (to a PBX extension)

or remote (to a telephone at a remote location, a cellular

telephone or a pager).

Security

The VME Office supports three types of 4-digit passwords:

Passwords

• Administrator for accessing all data stored in the VME

Office.

• Operator for accessing the system operating modes: Day,

Night, Holiday and Break.

• Mailbox for accessing individual mailboxes, where the

mailbox owners can change the password at all times.

Line Monitor

This option has been enhanced in the VME Office to display

all incoming and outgoing DTMF and system codes through

the RS-232 cable or modem connection.

Modem

The VME Office unit is equipped with a built in V.32 bis

modem, operating at 14.4 Kbps with fallback rates of 12, 9.6,

Support

and 4.8 Kbps. As the call is terminated, the VME Office hangs

up in order to clear the port for the next call.

Modem support can be enabled or disabled.

LCD

On the front panel of the VME Office the LCD display shows

the status of all 8 ports, system error messages and the current

installation.

VME Office Installation and Programming Manual, Version 1

Introduction

1-7