aleen VME Office Kurulum ve Programlama Kılavuzu - Sayfa 17
Sesli Mesaj aleen VME Office için çevrimiçi göz atın veya pdf Kurulum ve Programlama Kılavuzu indirin. aleen VME Office 20 sayfaları.
Sayfayı YazdırFeature
Description
The Administrator can increase the number of ports and
recording time by adding a four-port expansion module to the
basic VME Office unit.
Programming
The Administrator can program the VME Office using:
• A computer running the Voice Mail Utility Program. In this
case, it is highly recommended to save the configuration
files for each
• Via a modem connection.
• Touch-tone telephone using DTMF Codes.
Integration
The Administrator can integrate the VME Office with the PBX
with Your
using:
PBX
• In-band DTMF Protocol. This type of integration is
achieved by setting up the communication protocol of the
PBX and the VME Office unit (answering a call,
transferring a call, recalling as a result of a Busy or No
Answer condition, etc.).
• SMDI Integration via the RS-232 serial port. This type of
integration must be specifically developed for each type of
PBX.
Disconnection
Some PBXs can notify the VME Office through the line
interface when a call is terminated using Loop Disconnect,
Methods
DTMF Codes or the Busy and Disconnect Cadence. When the
VME Office detects this situation, the line is disconnected and
the unit is ready to receive another call.
The VME Office automatically notifies the mailbox owner of
Message
Notification
new messages. Notification may be local (to a PBX extension)
or remote (to a telephone at a remote location, a cellular
telephone or a pager).
Security
The VME Office supports three types of 4-digit passwords:
Passwords
• Administrator for accessing all data stored in the VME
Office.
• Operator for accessing the system operating modes: Day,
Night, Holiday and Break.
• Mailbox for accessing individual mailboxes, where the
mailbox owners can change the password at all times.
Line Monitor
This option has been enhanced in the VME Office to display
all incoming and outgoing DTMF and system codes through
the RS-232 cable or modem connection.
Modem
The VME Office unit is equipped with a built in V.32 bis
modem, operating at 14.4 Kbps with fallback rates of 12, 9.6,
Support
and 4.8 Kbps. As the call is terminated, the VME Office hangs
up in order to clear the port for the next call.
Modem support can be enabled or disabled.
LCD
On the front panel of the VME Office the LCD display shows
the status of all 8 ports, system error messages and the current
installation.
VME Office Installation and Programming Manual, Version 1
Introduction
1-7