Clarke CP180 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Sander Clarke CP180. Clarke CP180 13 halaman. Sander/polisher
Halaman Cetak
Overview
Spindle Lock
Assembly
Before assembling the sander/polisher, check for missing
parts and or damage caused in transit. Any defects
must be reported to the Clarke dealer where the tool
was originally purchased as soon as possible.
IMPORTANT: Before carrying out any adjustments or
repairs, ensure the sander/polisher is isolated from the
main electric supply by switching off and
removing the plug from the socket.
Fitting Handles
The handles can be fitted for either left or
right handed use, it is also possible to fit one or
both handles, depending on individual
choice.
1
'D' Handle Only
Slot the 'D' handle onto the body of the tool
see Fig. 2.
NOTE: the handle is recessed to fit onto the tool in one position only, and is not adjustable,
other than for left or right handed use.
'D' Handle
Backing Pad
Polishing Hood
Speed Control
Motor Brush
Side Handle
Fig. 1
D Shaped Boss
-5-
Trigger Lock
Trigger
Fig. 2