Clarke CP180 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke CP180에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CP180 13 페이지. Sander/polisher

Overview

Spindle Lock

Assembly

Before assembling the sander/polisher, check for missing

parts and or damage caused in transit. Any defects

must be reported to the Clarke dealer where the tool

was originally purchased as soon as possible.

IMPORTANT: Before carrying out any adjustments or

repairs, ensure the sander/polisher is isolated from the

main electric supply by switching off and

removing the plug from the socket.

Fitting Handles

The handles can be fitted for either left or

right handed use, it is also possible to fit one or

both handles, depending on individual

choice.

'D' Handle Only

Slot the 'D' handle onto the body of the tool

see Fig. 2.

NOTE: the handle is recessed to fit onto the tool in one position only, and is not adjustable,

other than for left or right handed use.

'D' Handle

Backing Pad

Polishing Hood

Speed Control

Motor Brush

Side Handle

Fig. 1

D Shaped Boss

-5-

Trigger Lock

Trigger

Fig. 2