Alemite 8301 Manual Petunjuk Servis - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Servis untuk Pompa Air Alemite 8301. Alemite 8301 11 halaman. Air-operated double diaphragm pump
Juga untuk Alemite 8301: Panduan Servis & Pengoperasian (10 halaman)

Halaman Cetak

SER 8301

6. Push bushing and spacer into the center hole in

body A. Press it firmly enough to seat ther "O" rings.

7. Insert the center rod (24) through the spacer (9)

and bushing (8).

8. Insert the other "O" ring (6) into the center hole in

body B (27).

9. Insert the second "O" ring (7) into the second

bushing (8).

10. Insert this bushing into center hole in body B.

11. Place body B (27) over the center rod (24).

NOTE: Be sure to align the air slot and the hole for

the tip of the valve guide.

12. Place "O" ring (5) into the slotted circle on body B.

NOTE: Make sure that the "O" ring is properly seated.

Repair-Kit Part

Figure 4: Components of Diaphragm Portion of Pump with Manifolds Removed

page 6

13. Place the diaphragm cushion (18) on the center

rod (24) next to body B (27).

14. Place the center disk (22) against the diaphragm

(17) and place both on the center rod (24).

15. Replace the diaphragm retaining nut (20) on the

center rod (24).

16. Repeat steps 12 through 15 for body A (25).

17. Hold one diaphragm retaining nut with a wrench

and turn the other one. Do not overtighten.

18. Insert the six tie rods (1) through one of the end

castings (21).

19. Place the body assembly on the end casting.

20. Place the other end casting on the body

assembly.

18 22

page revised 6-03