Alemite 8301 Servis Talimatları Kılavuzu - Sayfa 6
Su Pompası Alemite 8301 için çevrimiçi göz atın veya pdf Servis Talimatları Kılavuzu indirin. Alemite 8301 11 sayfaları. Air-operated double diaphragm pump
Ayrıca Alemite 8301 için: Servis ve Kullanım Kılavuzu (10 sayfalar)
Sayfayı Yazdır
SER 8301
6. Push bushing and spacer into the center hole in
body A. Press it firmly enough to seat ther "O" rings.
7. Insert the center rod (24) through the spacer (9)
and bushing (8).
8. Insert the other "O" ring (6) into the center hole in
body B (27).
9. Insert the second "O" ring (7) into the second
bushing (8).
10. Insert this bushing into center hole in body B.
11. Place body B (27) over the center rod (24).
NOTE: Be sure to align the air slot and the hole for
the tip of the valve guide.
12. Place "O" ring (5) into the slotted circle on body B.
NOTE: Make sure that the "O" ring is properly seated.
Repair-Kit Part
Figure 4: Components of Diaphragm Portion of Pump with Manifolds Removed
page 6
21
46
20
22
5
18
13. Place the diaphragm cushion (18) on the center
rod (24) next to body B (27).
14. Place the center disk (22) against the diaphragm
(17) and place both on the center rod (24).
15. Replace the diaphragm retaining nut (20) on the
center rod (24).
16. Repeat steps 12 through 15 for body A (25).
17. Hold one diaphragm retaining nut with a wrench
and turn the other one. Do not overtighten.
18. Insert the six tie rods (1) through one of the end
castings (21).
19. Place the body assembly on the end casting.
20. Place the other end casting on the body
assembly.
25
27
5
18 22
20
46
21
2
3
4
page revised 6-03