Alemite 3644-C2 Panduan Singkat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Singkat untuk Alat Ukur Alemite 3644-C2. Alemite 3644-C2 5 halaman. Preset batch meter

Dispensing in

AUTO mode

• To start dispensing:

Pull the trigger

completely and then

release it.

The trigger thus

remains locked in open

position. Now

dispensing can

continue in AUTO

mode

• To stop manually dispensing in

progress:

Pull again the trigger completely and

then release it.

Warning

In any case the operator must

attend to the METER while

dispensing in AUTO mode in

order to avold any oil spillage

• Automatic stop:

The supply automatically stops when

the pre-set value is reached..

1-800-548-1191 - http://www.partdeal.com - [email protected]

The AUTO indication

disappears from the LCD.

• Manual resumption of the

dispensing (TOPPING UP):

Once dispensing has been carried out

in AUTO mode, the METER allows the

user to continue the dispensing

operation, if necessary.

To carry out the TOPPING UP,

DO NOT type RESET and pull

the trigger.

The dispensed amount is added to the

previous one in AUTO mode.

The PRESET value previously set,

displayed in the Total, starts blinking

to indicate that the pre-set value has

been exceeded.

Blinking value.