- ページ 5
計測機器 Alemite 3644-C2のPDF ショートマニュアルをオンラインで閲覧またはダウンロードできます。Alemite 3644-C2 5 ページ。 Preset batch meter
ページを印刷するC
Dispensing in
AUTO mode
• To start dispensing:
Pull the trigger
completely and then
release it.
The trigger thus
remains locked in open
position. Now
dispensing can
continue in AUTO
mode
• To stop manually dispensing in
progress:
Pull again the trigger completely and
then release it.
Warning
In any case the operator must
attend to the METER while
dispensing in AUTO mode in
order to avold any oil spillage
• Automatic stop:
The supply automatically stops when
the pre-set value is reached..
1-800-548-1191 - http://www.partdeal.com - [email protected]
The AUTO indication
disappears from the LCD.
• Manual resumption of the
dispensing (TOPPING UP):
Once dispensing has been carried out
in AUTO mode, the METER allows the
user to continue the dispensing
operation, if necessary.
To carry out the TOPPING UP,
DO NOT type RESET and pull
the trigger.
The dispensed amount is added to the
previous one in AUTO mode.
The PRESET value previously set,
displayed in the Total, starts blinking
to indicate that the pre-set value has
been exceeded.
Blinking value.
5