Clarke CPS160 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Melihat Clarke CPS160. Clarke CPS160 17 halaman. 160 mm plunge saw
Halaman Cetak
SAWING
1. Place the front part of the plunge
saw onto the work piece.
2. Slide the plunge release button
upward and squeeze the on/off
trigger to start the saw.
3. Push the saw down until you
reach the set cutting depth.
4. Push the saw forward along the
cut line.
5. Release the on/off trigger. and allow the saw to spring up when the saw
cutting is complete.
PLUNGE CUTS
1. Mark the beginning and end of
the cut on the workpiece, place
the plunge saw onto the work
piece.
2. Align the cutting indicator (A) with
the start of the plunge-cut.
3. Slide the plunge release button
upward and squeeze the on/off
trigger to start the saw.
4. Push the saw down until you
reach the set cutting depth.
5. Move the saw forwards until the front cutting indicator (C) reaches the end
of the plunge cut.
6. Release the on/off trigger. and allow the saw to spring up when the saw
cutting is complete.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11