- ページ 11

ソウ Clarke CPS160のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CPS160 17 ページ。 160 mm plunge saw

SAWING

1. Place the front part of the plunge

saw onto the work piece.

2. Slide the plunge release button

upward and squeeze the on/off

trigger to start the saw.

3. Push the saw down until you

reach the set cutting depth.

4. Push the saw forward along the

cut line.

5. Release the on/off trigger. and allow the saw to spring up when the saw

cutting is complete.

PLUNGE CUTS

1. Mark the beginning and end of

the cut on the workpiece, place

the plunge saw onto the work

piece.

2. Align the cutting indicator (A) with

the start of the plunge-cut.

3. Slide the plunge release button

upward and squeeze the on/off

trigger to start the saw.

4. Push the saw down until you

reach the set cutting depth.

5. Move the saw forwards until the front cutting indicator (C) reaches the end

of the plunge cut.

6. Release the on/off trigger. and allow the saw to spring up when the saw

cutting is complete.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]