Clarke CSS 400 Panduan Pengoperasian dan Pemeliharaan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Melihat Clarke CSS 400. Clarke CSS 400 14 halaman. 400mm (16") scroll saw
Halaman Cetak
ELECTRICAL CONNECTIONS
Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved 13
amp BS 1363 plug, or a suitably fused isolator switch.
WARNING! THIS APPLIANCE MUST BE EARTHED
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:
As the colours of the flexible lead of this appliance may not correspond with the coloured markings
identifying terminals in your plug proceed as follows:
•
Connect GREEN & YELLOW coloured cord to plug terminal marked with a letter "E" or Earth
symbol "
" or coloured GREEN or GREEN & YELLOW.
•
Connect BROWN coloured cord to plug terminal marked with a letter "L" or coloured RED.
•
Connect BLUE coloured cord to plug terminal marked with a letter "N" or coloured BLACK.
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non-rewirable)
please note:
1.
The plug must be thrown away if it is cut from the electric cable. There is a danger of electric
shock if it is subsequently inserted into a socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct replacement
is used (as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local dealer or most electrical stockists.
FUSE RATING
The fuse in the plug must be replaced with one of the same rating (5 amps) and this replacement
must be ASTA approved to BS1362.
Green & Yellow
-
Earth
Blue
-
Neutral
Brown
-
Live
6