Clarke CSS 400 운영 및 유지보수 매뉴얼 - 페이지 5

{카테고리_이름} Clarke CSS 400에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CSS 400 14 페이지. 400mm (16") scroll saw

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved 13

amp BS 1363 plug, or a suitably fused isolator switch.

WARNING! THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

As the colours of the flexible lead of this appliance may not correspond with the coloured markings

identifying terminals in your plug proceed as follows:

•

Connect GREEN & YELLOW coloured cord to plug terminal marked with a letter "E" or Earth

symbol "

" or coloured GREEN or GREEN & YELLOW.

•

Connect BROWN coloured cord to plug terminal marked with a letter "L" or coloured RED.

•

Connect BLUE coloured cord to plug terminal marked with a letter "N" or coloured BLACK.

If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non-rewirable)

please note:

The plug must be thrown away if it is cut from the electric cable. There is a danger of electric

shock if it is subsequently inserted into a socket outlet.

Never use the plug without the fuse cover fitted.

Should you wish to replace a detachable fuse carrier, ensure that the correct replacement

is used (as indicated by marking or colour code).

Replacement fuse covers can be obtained from your local dealer or most electrical stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (5 amps) and this replacement

must be ASTA approved to BS1362.

Green & Yellow

Earth

Blue

Neutral

Brown

Live