Clarke IQ2000 Petunjuk Pemasangan & Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Pengoperasian untuk Pemanas Clarke IQ2000. Clarke IQ2000 13 halaman. Infrared quartz wall heater
Halaman Cetak
OPERATION
1. Connect the mains cable to a suitable power socket.
2. Pull the string repeatedly to cycle
through the following heat
settings;
• O = Off
• I = Low
• II = Medium
• III = High
CLEANING AND MAINTENANCE
WARNING: BEFORE CARRYING OUT ANY MAINTENANCE, ENSURE THE
HEATER IS SWITCHED OFF, DISCONNECTED FROM THE MAINS SUPPLY,
AND HAS BEEN GIVEN ADEQUATE TIME TO COOL DOWN.
PERIODICALLY
1. If there is any build up of dirt, wipe thoroughly with a damp cloth ,taking
care that no moisture enters the heater.
2. Inspect the power cable for damage. Undue heat will cause the cable to
stiffen and crack in which case it should be replaced.
3. Ensure heating elements are free of dust (use compressed air to clean if
possible. (ALWAYS wear a dust mask if performing this task).
4. Refer to your Clarke dealer if the heater element needs replacing.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7