- ページ 7

ヒーター Clarke IQ2000のPDF 取付・取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke IQ2000 13 ページ。 Infrared quartz wall heater

OPERATION

1. Connect the mains cable to a suitable power socket.

2. Pull the string repeatedly to cycle

through the following heat

settings;

• O = Off

• I = Low

• II = Medium

• III = High

WARNING: BEFORE CARRYING OUT ANY MAINTENANCE, ENSURE THE

HEATER IS SWITCHED OFF, DISCONNECTED FROM THE MAINS SUPPLY,

AND HAS BEEN GIVEN ADEQUATE TIME TO COOL DOWN.

PERIODICALLY

1. If there is any build up of dirt, wipe thoroughly with a damp cloth ,taking

care that no moisture enters the heater.

2. Inspect the power cable for damage. Undue heat will cause the cable to

stiffen and crack in which case it should be replaced.

3. Ensure heating elements are free of dust (use compressed air to clean if

possible. (ALWAYS wear a dust mask if performing this task).

4. Refer to your Clarke dealer if the heater element needs replacing.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]