Clarke 1801718 Petunjuk Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Peralatan Clarke 1801718. Clarke 1801718 4 halaman. Universal hub/bearing puller

INTRODUCTION

Thank you for purchasing this CLARKE product. The kit may be used for

installing seals and bearings into the hubs of most vehicles. It may also be

used for pulling hubs where the wheel flange is drilled and tapped so that the

road wheel is secured with bolts.

Please read and follow the instructions carefully. In doing so you will ensure

the safety of yourself and others around you, and you can look forward to

the product giving you long & satisfactory service.

Please keep these instructions in a safe place for future reference

KIT CONTENTS

Disc - 55.5mm (2-3/16") HTCHT71801

Disc - 59mm (2-11/32") HTCHT71802

Disc - 62mm (2-7/16") HTCHT71803

Disc - 65mm (2-9/16") HTCHT71804

Disc - 66mm (2-19/32") HTCHT71805

Disc -71.5mm (2-13/16")HTCHT71806

Disc - 73mm (2-7/8")

Disc - 78mm (3-3/32") HTCHT71808

Disc - 84mm (3-5/16") HTCHT71809

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

HTCHT71807

C2 Bolt M12 x 90

Sleeve 76mm (3")

Cup- 86mm (3-13/32") HTCHT71811

Cup- 91mm (3-19/32") HTCHT71812

Bolt M14 x 90

Flat Washer

Sleeve 36mm (1-7/16") HTCHT71815

Centre Bolt

Thrust Washers

Long Nut

HTCHT71810

HTCHT71813

HTCHT71814

HTCHT71816

HTCHT71817

HTCHT71818

HTCHT71819