Clarke 1801718 Instrukcje użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Narzędzia Clarke 1801718. Clarke 1801718 4 stron. Universal hub/bearing puller
Drukuj stronę
INTRODUCTION
Thank you for purchasing this CLARKE product. The kit may be used for
installing seals and bearings into the hubs of most vehicles. It may also be
used for pulling hubs where the wheel flange is drilled and tapped so that the
road wheel is secured with bolts.
Please read and follow the instructions carefully. In doing so you will ensure
the safety of yourself and others around you, and you can look forward to
the product giving you long & satisfactory service.
Please keep these instructions in a safe place for future reference
KIT CONTENTS
1
Disc - 55.5mm (2-3/16") HTCHT71801
2
Disc - 59mm (2-11/32") HTCHT71802
3
Disc - 62mm (2-7/16") HTCHT71803
4
Disc - 65mm (2-9/16") HTCHT71804
5
Disc - 66mm (2-19/32") HTCHT71805
6
Disc -71.5mm (2-13/16")HTCHT71806
7
Disc - 73mm (2-7/8")
8
Disc - 78mm (3-3/32") HTCHT71808
9
Disc - 84mm (3-5/16") HTCHT71809
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
A
B1
B2
C1
D
E
HTCHT71807
F
G
H
C2 Bolt M12 x 90
2
Sleeve 76mm (3")
Cup- 86mm (3-13/32") HTCHT71811
Cup- 91mm (3-19/32") HTCHT71812
Bolt M14 x 90
Flat Washer
Sleeve 36mm (1-7/16") HTCHT71815
Centre Bolt
Thrust Washers
Long Nut
HTCHT71810
HTCHT71813
HTCHT71814
HTCHT71816
HTCHT71817
HTCHT71818
HTCHT71819