Clarke CDTJ24 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Peralatan Clarke CDTJ24. Clarke CDTJ24 12 halaman. Dovetail jig
Halaman Cetak
SETTING THE END STOPS
1. Use a set square to draw a pencil
line halfway across the first finger
of the template
• The line must be square to the
edges of the template.
2. Line up the inside edge of the left
horizontal stop with the line you
just drew on the template.
• Use a set square to ensure the
stop is square to the jig.
3. Offset the vertical stop 1/2" to the
right of the horizontal stop.
• Ensure the vertical stop is
square to the top of the jig.
4. Mirror these settings on the right
hand side of the jig.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6