Clarke CDTJ24 Handleiding voor bediening en onderhoud - Pagina 6

Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke CDTJ24. Clarke CDTJ24 12 pagina's. Dovetail jig

SETTING THE END STOPS

1. Use a set square to draw a pencil

line halfway across the first finger

of the template

• The line must be square to the

edges of the template.

2. Line up the inside edge of the left

horizontal stop with the line you

just drew on the template.

• Use a set square to ensure the

stop is square to the jig.

3. Offset the vertical stop 1/2" to the

right of the horizontal stop.

• Ensure the vertical stop is

square to the top of the jig.

4. Mirror these settings on the right

hand side of the jig.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]