Clarke Metalworker CPTN1 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Peralatan Clarke Metalworker CPTN1. Clarke Metalworker CPTN1 12 halaman. Pipe notcher
Halaman Cetak
14. Have your tool repaired by a qualified person. Repairs should only be
carried out by qualified persons using original spare parts, otherwise this
may result in considerable danger to the user.
15. NEVER use this product for any other purpose than that described in this
manual.
16. ALWAYS refer to the operating and safety instructions provided with your
drill or drill press.
SAFETY SYMBOLS
The following symbols are shown on the product or it's packaging.
SPECIFICATION
Dimensions (L x W x H)
Weight
Maximum Tube Diameter
Chuck Dimension
Workpiece Degree Range
Req. Clearance Between Chuck & Table 14 inch (35cm)
Spindle Threads
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Read instruction
manual before use
Do not wear gloves
Wear a mask
Wear eye protection
Wear Ear Protection
(see drill/drill press
manual for relevant
information)
290mm x 160mm x 410mm
5 kg
2 inch (50mm)
1/2 inch (12.7mm)
o
0 - 60
1/2 & 5/8 Inch (12.7 & 15.9mm)
4