Clarke Metalworker CPTN1 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Peralatan Clarke Metalworker CPTN1. Clarke Metalworker CPTN1 12 halaman. Pipe notcher
Halaman Cetak
GENERAL SAFETY RULES
WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY INCLUDING THE
FOLLOWING. READ ALL THESE INSTRUCTIONS BEFORE ATTEMPTING TO
OPERATE THIS PRODUCT AND SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
GENERAL SAFETY IN THE WORKPLACE
1. Read this manual carefully. Learn the tools applications and limitations, as
well as the specific potential hazards associated to it.
2. ALWAYS keep work area clean & tidy. Cluttered work areas and benches
invite accidents.
3. ALWAYS use a clamp or make sure the notcher is bolted to a table/
workbench to hold the work. It should NEVER be held with bare hands.
4. NEVER over-reach. Keep proper footing and balance at all times.
5. NEVER store equipment in a wet/damp environment or expose to rain.
6. Keep other persons away. DO NOT let persons, especially children, not
involved in the work, touch the tool and keep them away from the work
area.
7. NEVER operate a machine/tool when under the influence of alcohol, drugs
or medication.
8. ALWAYS ensure the workplace is well lit. Ensure that lighting is placed so that
you will not be working in your own shadow.
9. DO NOT use power tools in the presence of flammable liquids or gasses.
10. Stay alert, watch what you are doing, use common sense and DO NOT
operate the machine/tool when you are tired.
11. ALWAYS remove any adjusting keys or wrenches before starting. Form the
habit of checking to ensure that keys, wrenches and tools are removed
from the machine.
12. DO NOT force the machine and use the correct power tool. It will do the
job better and safer, at the rate for which it was intended.
13. Before further use of the tool, it should be carefully checked to determine
that it will operate properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts, breakage of parts,
mounting or other condition that may affect its operation.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3