Clarke Metalworker CPTN1 운영 및 유지보수 지침 매뉴얼 - 페이지 3

{카테고리_이름} Clarke Metalworker CPTN1에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Metalworker CPTN1 12 페이지. Pipe notcher

GENERAL SAFETY RULES

WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY INCLUDING THE

FOLLOWING. READ ALL THESE INSTRUCTIONS BEFORE ATTEMPTING TO

OPERATE THIS PRODUCT AND SAVE THESE INSTRUCTIONS FOR FUTURE

REFERENCE.

GENERAL SAFETY IN THE WORKPLACE

1. Read this manual carefully. Learn the tools applications and limitations, as

well as the specific potential hazards associated to it.

2. ALWAYS keep work area clean & tidy. Cluttered work areas and benches

invite accidents.

3. ALWAYS use a clamp or make sure the notcher is bolted to a table/

workbench to hold the work. It should NEVER be held with bare hands.

4. NEVER over-reach. Keep proper footing and balance at all times.

5. NEVER store equipment in a wet/damp environment or expose to rain.

6. Keep other persons away. DO NOT let persons, especially children, not

involved in the work, touch the tool and keep them away from the work

area.

7. NEVER operate a machine/tool when under the influence of alcohol, drugs

or medication.

8. ALWAYS ensure the workplace is well lit. Ensure that lighting is placed so that

you will not be working in your own shadow.

9. DO NOT use power tools in the presence of flammable liquids or gasses.

10. Stay alert, watch what you are doing, use common sense and DO NOT

operate the machine/tool when you are tired.

11. ALWAYS remove any adjusting keys or wrenches before starting. Form the

habit of checking to ensure that keys, wrenches and tools are removed

from the machine.

12. DO NOT force the machine and use the correct power tool. It will do the

job better and safer, at the rate for which it was intended.

13. Before further use of the tool, it should be carefully checked to determine

that it will operate properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts, breakage of parts,

mounting or other condition that may affect its operation.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]