Dirotec Nivcomp RX1 Lampiran Pada Manual - Halaman 6
Jelajahi secara online atau unduh pdf Lampiran Pada Manual untuk Alat Ukur Dirotec Nivcomp RX1. Dirotec Nivcomp RX1 8 halaman. Version with test series memory and apu-control
Halaman Cetakusa
ExPlanation to thE Data rEcorDs
As the records consist of a series of Z-coordinates without X-Y-orientation, an area should
always be measured according to plan with specification of the measuring-points (P 1 ... P n).
You can record up to 8 measure-value-series (separated areas).
Particular measurements (as for example corner – or turning points) can be marked as X-Y-
orientation with operative surveyings of smaller areas.
transfEr of thE MEasurEMEnt-Data on a Pc
For reading the measurement-data, an USB-transceiver-stick and the program FLOOREC is
required.
After the start of the program FLOOREC, the nivcomp is to be switched on. The measure-
data will be transferred automatically and the nivcomp turns itself off again.
Display PC seeks and sends (1... 3 s):
heed:
Do not position the nivcomp hand-unit directly besides the USB trans ceiver-stick. As long as
no new data is recorded, the previous data can be read again.
FLOOREC allows simple calculations and stores the measurements in text-forms, which are
usable with MS-Excel and particular software.
aPu-MoDE (attachMEnt for hanDling)
The combination with the automatic positioning unit APU-Axx will be recognized automati-
cally (see APU-manual).