Dirotec Nivcomp RX1 매뉴얼 첨부 파일 - 페이지 6

{카테고리_이름} Dirotec Nivcomp RX1에 대한 매뉴얼 첨부 파일을 온라인으로 검색하거나 PDF를 다운로드하세요. Dirotec Nivcomp RX1 8 페이지. Version with test series memory and apu-control

usa

ExPlanation to thE Data rEcorDs

As the records consist of a series of Z-coordinates without X-Y-orientation, an area should

always be measured according to plan with specification of the measuring-points (P 1 ... P n).

You can record up to 8 measure-value-series (separated areas).

Particular measurements (as for example corner – or turning points) can be marked as X-Y-

orientation with operative surveyings of smaller areas.

transfEr of thE MEasurEMEnt-Data on a Pc

For reading the measurement-data, an USB-transceiver-stick and the program FLOOREC is

required.

After the start of the program FLOOREC, the nivcomp is to be switched on. The measure-

data will be transferred automatically and the nivcomp turns itself off again.

Display PC seeks and sends (1... 3 s):

heed:

Do not position the nivcomp hand-unit directly besides the USB trans ceiver-stick. As long as

no new data is recorded, the previous data can be read again.

FLOOREC allows simple calculations and stores the measurements in text-forms, which are

usable with MS-Excel and particular software.

aPu-MoDE (attachMEnt for hanDling)

The combination with the automatic positioning unit APU-Axx will be recognized automati-

cally (see APU-manual).