Dirt Devil 360 REACH DD360 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyedot Debu Dirt Devil 360 REACH DD360. Dirt Devil 360 REACH DD360 20 halaman.
Halaman Cetak
- 1. Table of Contents
- 1. Quick Start Assembly
- 2. Tools
- 3. Using the Tools
- 3. Above Floor Cleaning
- 4. How to
- 4. Empty the Dirt Cup
- 4. Clean the Rinsable Filter
- 4. Clean the Exhaust Filter
- 4. Clean the Cyclonic Filter Assembly
- 4. Clean the Brush Roll
- 4. Store Your Unit
- 5. Troubleshooting
- 6. Technical Specifications
NOTICE
A THERMAL PROTECTOR HAS BEEN DESIGNED INTO YOUR
CLEANER TO PROTECT IT FROM OVERHEATING. WHEN THE
THERMAL PROTECTOR ACTIVATES THE CLEANER WILL STOP
RUNNING.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty dirt cup.
3. Inspect the nozzle opening, dirt cup inlet and filter. Clear obstructions if present.
4. When cleaner is unplugged and motor cools for 30 minutes, the thermal protector
will deactivate and cleaning may continue.
If the thermal protector continues to activate after following the above
steps, your cleaner needs servicing.
IMPORTANT
IT IS VERY IMPORTANT THAT FILTERS ARE KEPT CLEAN TO
OBTAIN MAXIMUM PERFORMANCE FROM YOUR VACUUM
CLEANER. NOT CLEANING AND NOT REPLACING YOUR
FILTERS REGULARLY CAN REDUCE THE SUCTION POWER
AND CAUSE OVERHEATING AND PERMANENT DAMAGE TO
THE VACUUM CLEANER.
5