Nikon COOLSHOT 80 VR Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Ukur Nikon COOLSHOT 80 VR. Nikon COOLSHOT 80 VR 41 halaman.

Halaman Cetak

1. Key Features

[First step]

￭ Inserting/Replacing battery

1. Type of battery

3V CR2 lithium battery x1

2. Inserting/Replacing battery

2-1. Open the battery chamber cover

Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber

packing for water resistance.

2-2. Insert the battery/Replace the old battery with a new one

Insert a new battery correctly positioned following the indication seal inside the chamber.

The [+] pole should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the

Nikon Laser Rangefinder will not operate. When replacing the battery, remove the old battery then insert a new

one.

2-3. Close the battery chamber cover

Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the rubber

packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely

closed.

3. Battery level indicator

*The battery condition mark in the internal display warns when the battery needs to be replaced.

Display

After power on, displays for 2 seconds only.

Displayed continuously.

Blinks. After blinking 3 times, automatically

powers off.

Description

Sufficient power available.

Power getting low.

Prepare to replace the battery.

Low. Battery should be replaced with a new one.

Power exhausted.

Replace the battery.

[Mode settings]

■ Operation overview

Standby

Long press of MODE button

(1.5 seconds or more)

Long press of MODE button

(1.5 seconds or more)

Long press of MODE button

(1.5 seconds or more)

COOLSHOT 80i VR only

Changing the measurement display mode (F2)

Golf mode:

Slope adjusted distance (horizontal distance ± height) and

actual distance

Horizontal distance and height mode

*Unoperated for 8 seconds or longer returns you to the standby screen whichever setting mode is displayed.

Changing the distance display

unit (F1)

Short press of PWR button (less than 1.5

seconds) switches unit.

Short press of MODE button

(less than 1.5 seconds)

Short press of PWR button (less than 1.5 seconds)

switches modes.

Actual distance

N/A

mode

Actual distance and

height mode