Nikon COOLSHOT 80 VR 사용 설명서 - 페이지 7
{카테고리_이름} Nikon COOLSHOT 80 VR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon COOLSHOT 80 VR 41 페이지.
[First step]
En
■ Inserting/Replacing battery
Es
1. Type of battery
3V CR2 lithium battery x1
Fr
2. Inserting/Replacing battery
Pt
2-1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber
packing for water resistance.
2-2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber.
The [+] pole should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the
Nikon Laser Rangefinder will not operate. When replacing the battery, remove the old battery then insert a new
one.
2-3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the rubber
packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely
closed.
3. Battery level indicator
*The battery condition mark in the internal display warns when the battery needs to be replaced.
Display
After power on, displays for 2 seconds only.
After power on, displays for 2 seconds only.
Displayed continuously.
Blinks. After blinking 3 times, automatically
powers off.
12
Description
Sufficient power available.
Power getting low.
Prepare to replace the battery.
Low. Battery should be replaced with a new one.
Power exhausted.
Replace the battery.
[Mode settings]
■ Operation overview
Standby
Long press of MODE button
(1.5 seconds or more)
Long press of MODE button
(1.5 seconds or more)
Long press of MODE button
(1.5 seconds or more)
COOLSHOT 80i VR only
Changing the measurement display mode (F2)
Golf mode:
Slope adjusted distance (horizontal distance ± height) and
actual distance
Horizontal distance and height mode
*Unoperated for 8 seconds or longer returns you to the standby screen whichever setting mode is displayed.
Changing the distance display
unit (F1)
YD
m
Short press of PWR button (less than 1.5
seconds) switches unit.
Short press of MODE button
(less than 1.5 seconds)
Short press of PWR button (less than 1.5 seconds)
switches modes.
Actual distance
N/A
mode
Actual distance and
height mode
13
En
Es
Fr
Pt