Nikon COOLSHOT 80 VR 사용 설명서 - 페이지 6

{카테고리_이름} Nikon COOLSHOT 80 VR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon COOLSHOT 80 VR 41 페이지.

￭ Internal display

employing model indication

Laser irradiation mark

(COOLSHOT 80i VR only)

Measurement display mode

indications

Battery condition

: Aim at the target you want to measure. Position the target at the centre of the reticle.

: Appears while the laser is being irradiated for a measurement.

Do not look towards the objective lens side while this mark is shown.

: When measuring overlapping subjects, and the distance to the closest subject is displayed,

this sign is lit.

: "Failure to measure" or "Unable to measure"

*Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.

This will not, however, affect the measurement accuracy.

(COOLSHOT 80i VR only)

Height (actual distance at golf

mode setting)

Target mark

Unit of measure (m/yd.)

Distance

[Functions]

■ VR (Vibration Reduction) function

●

ON and OFF

The VR (Vibration Reduction) function is activated concurrently when the Laser

Rangefinder is ON.

When the Laser Rangefinder is OFF, the VR (Vibration Reduction) function

automatically turns off.

When measuring overlapping subjects, First Target Priority algorithm displays the distance to the closest

subject.

■ First Target Priority detection sign

When measuring overlapping subjects, such as a flagstick with trees in the background, and the distance to

a closest subject is displayed, First Target Priority detection sign* is lit in the viewfinder.

*Single measurement: When measuring overlapping subjects and the distance to a closest subject is

displayed, the sign appears.

Continuous measurement: When displayed figures shift to a closer subject, the sign appears.

First Target Priority detection sign is lit.