Armstrong Rada 320D Panduan Instalasi dan Pemeliharaan - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pemeliharaan untuk Unit Kontrol Armstrong Rada 320D. Armstrong Rada 320D 20 halaman. Water temperature controls groups of fixtures - thermostatic
Juga untuk Armstrong Rada 320D: Panduan Instalasi dan Pemeliharaan (12 halaman), Panduan Instalasi dan Pemeliharaan (20 halaman)
Halaman Cetak
Step 1
b
a
a. Unscrew the set screw.
b. Remove the Backplate.
Step 3
a. Important! Prior to assembly of the hot and cold
adapters, look inside each one and ensure that there
is a strainer and a white plastic checkvalve. The
adapter with nothing inside is for the outlet.
Thread the coupling nuts onto the Valve assembly
then tighten using an adjustable spanner.
Caution! Use a soft cloth to protect the plating
from damage while tightening the spanner.
Step 2
1
4
Ø 6 mm
2.5 mm
a. Use the Backplate to mark the four mounting holes at
the desired height.
b. Drill the holes (6 mm) and fit the wall anchors. Screw
the Backplate to the wall.
Caution! Avoid area where underground wirings
or pipelines pass through.
Step 4
a. Mount the Valve assembly on the Backplate fixed on
the wall. Make sure the Valve assembly locks in the
groove.
b. Tighten the set screw.
10
3
2
6.0 mm
2.5 mm