DIS Domyos VM 480 Panduan Petunjuk Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sepeda Latihan DIS Domyos VM 480. DIS Domyos VM 480 17 halaman.

Your FC 400 console's navigation system features:

• a central settings button (E)

• two buttons enabling you to navigate the screens (B and D)

• two value adjustment buttons (A and C)

Speed:

This function indicates estimated speed, either in km/h or mph,

depending on the position of the switch at the rear of the product

(see diagram).

Distance:

This function indicates estimated distance since the beginning of

the exercise session. This can be displayed in km (kilometres) or

M (miles) depending on the position of the switch on the rear of

the product.

Time:

This function indicates the time elapsed since the beginning of

the workout.

This is indicated in "Minutes: Seconds for the first hour, then it

switches to "Hours: Minutes".

After 10h the counter is automatically reset to 0.

Remember: To return to settings mode, hold down button E.

You can use buttons A and C to increase and decrease the values.

You can scroll through the increments more quickly by pressing down for longer.

You use button B to confirm your selection and to go to the next setting.

If you make a mistake, use button D to go back to a previous screen.

When you have completed your settings, press button E to leave settings mode.

E N G L I S H

BUTTON FUNCTIONS

FUNCTIONS

FUNCTIONS DIAGRAM

Calories:

This function displays an estimation of calories expended since

the beginning of the session.

Heart rate*:

Place the palms of your hands on the pulse sensors; after a few

seconds the heart rate indicator will flash and your heart rate will

be displayed in beats per minute

* IMPORTANT: this is only an estimate, which should in

no circumstances be considered medically reliable.

• IMPORTANT: For several dozen seconds or when there is a rapid

change in heart rate, the value displayed may not match your actual

heart rate.

This is due to the mechanism starting up.