Disc Makers ReflexUltra Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Duplikator Disk Disc Makers ReflexUltra. Disc Makers ReflexUltra 13 halaman. Dvd±r
Juga untuk Disc Makers ReflexUltra: Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)
Halaman Cetak
1. Copy the master to the hard drive by using the Image function. Press the
Down arrow until you see 9. Image then press the ENT button. You should
see the following displayed on the LCD screen:
9-01. Image
Load
2. Load the top drive with the master disc and press the ENT button. The mas-
ter disc will be copied to the hard drive and the display will read Image Load
OK.
3. Press the ESC key two times until 9. Image appears on the LCD display. Then
use the Up arrow to return to 1. Copy.
4. Load the drives with Disc Makers Ultra CD-Rs and press the ENT button. The
duplication process will begin, and when completed, the ReflexUltra will eject
the successfully copied discs. When the copy is complete the LCD will read:
1. Copy
OK: 04
Appearing next to OK will be the number of successfully copied discs. In the
this example, 4 discs were successfully copied.
D
-
-D
C
ISC
TO
ISC
OPYING
The ReflexUltra is factory preset to do Hard-Drive-to-Disc copying. The unit can
be changed to Disc-to-Disc mode relatively easily.
1. From the 1. Copy screen, press the Down arrow until 8. Select Source
appears in the LCD screen.
1-888-800-4041
P:A
P:A
www.discmakers.com
2. Press the ENT button and the following display will appear:
SRC: hard drive
00 IDE0 Master
3. Press the Down arrow once for Src: CD-RW Ø1 IDE1 Master press the ENT
key and the new source will be the top CD recorder drive. The LCD will display
CD-RW selected!
4. Press the Up arrow to return to 1. Copy, notice that P: A is no longer dis-
played on the screen. This is how you can determine if your unit is operating
in the Disc-to-Disc copy mode or the Hard-Drive-to-Disc mode. The Hard-
Drive-to-Disc mode will always show the P:.. at the right side of the screen
and what partition of the drive is being used.
5. To begin the duplication operation, load the top drive the Src drive with the
master disc. Load the other recorders—one or as many as needed—with
Disc Makers Ultra CD-Rs.
6. Press the ENT button to begin duplicating. The unit will automatically ana-
lyze the master disc (this may take several moments), and begin duplicat-
ing at the maximum recording speed.
9. The LCD will show the progress and display OK when the duplication is com-
plete. Upon successful duplication, all copied discs will be ejected. If any disc
fails the duplication, it will remain in the bottom drive.
The LCD will display:
1. Copy
OK: 03
In this example three discs were successfully copied.
The same duplication job may be continued by reloading the recorder drives
T
06