Discount Car Stereo A2DIY-CR12 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Mobil Discount Car Stereo A2DIY-CR12. Discount Car Stereo A2DIY-CR12 8 halaman. Bluetooth kit for porsche cr-1 and cr-2 radios

Halaman Cetak

Introduction:

If looking to add

Bluetooth®

features to Porsche CR-1 or CR-2 radios you should

consider the A2DIY-CR12 kit. This revised easy to install kit is essential to adding

Bluetooth®

features to older vehicles while keeping everything stock. This "triple

play" module sounds great for (1) mobile conversations, (2) streaming Pandora,

Sirius radio, Apple music, audiobook, podcast and (3) CD changer retention or an

AUX input (for vehicles with changer). Use included smart remote to adjust

Smartphone: volume, track up/down/pause and more and can be mounted to

steering wheel or dashboard. In addition, an optional "Fast charge' USB port helps

to keep devices charged while on the road. Thanks to the A2DIY-CR12 kit, Porsche

owners can update to

Bluetooth® 4.1

Works in vehicles with or without CD changer.

If retaining CD changer; skip to installation 2 on page 4.

See Frequently Asked question at the end of this guide for more details.

Installation 1

: (Without CD changer or not retaining it)

Radio removal required to gain access to connectors.

Remove trim ring and ensure the 2 tabs are centered at which point the radio is

pulled out the dash (grasping the cassette opening provides some leverage) or

push from rear. Proceed with step 1 below

Alert:

If vehicle has a CD changer but not retaining it, simply disconnect CD changer

plug from radio.

Connect module installation harness 13-pin plug (See Fig. 1) to radio 13-

pin connector (See Fig. 2)

without changing original radio.

Fig. 2

radio connector

Fig. 3

2. Connect installation harness 22-pin plug (see Fig. 3) to module 22-pin

connector (See Fig. 4)

Fig. 1