Discount Car Stereo A2DIY-CR12 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Mobil Discount Car Stereo A2DIY-CR12. Discount Car Stereo A2DIY-CR12 8 halaman. Bluetooth kit for porsche cr-1 and cr-2 radios

Halaman Cetak

3. Connect push button 1/8" plug to Module "CTR" jack (See Fig. 4), route

button to front of the dash, remove tape backing, clean are and attach

button to surface (cable is 6ft. long). (See Fig. 5)

Fig. 5

push button

5. Use clip to install microphone to visor or headliner and route cable down

pillar, under dashboard toward module location and connect to module

"MIC" input.

Exercise caution when routing microphone so to not damage the

cable. Also ensure no ventilation duct is pointed towards

microphone.

Microphone

Fig. 6

Fig. 4

module

Optional push button with built-in microphone

For added installation flexibility, we offer optional push button with built-in

microphone seen in images below. This option replaces conventional visor

microphone and separate push button shown in Fig. 5 and 6. ages; which

means button can be placed on dashboard within driver reach or custom

installed nearby. Connect 1/8" plug to module "MIC/CTR" jack (See Fig. 4),

route to dash area (cable is 6ft. long); clean surface, remove tape backing and

attach to dash. (To add this option to cart, simply tap option on order page)

6. Disconnect (car side) 8-pin plug from radio 8-pin connector (See Fig. 7)

Radio harness 8-pin connectors

Fig. 7