Discount Car Stereo A2DIY-GM3 Panduan Instalasi Mulai Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi Mulai Cepat untuk Aksesori Mobil Discount Car Stereo A2DIY-GM3. Discount Car Stereo A2DIY-GM3 7 halaman. For select 2000-07 gm class ii
Halaman Cetak5. Connect male-to-male cable (See Fig. 4) to AUX input on module (See Fig.
3)
3.5mm male to male cable
6. Connect push-to talk button 1/8" plug to Module "CTR" jack, route button
to front of the dash, remove tape backing and stick to dash (cable is 6ft.
long). (See Fig. 5)
Noteworthy: Push-to-talk button not required for Android devices
because its (2) functions can be performed from included wireless
remote. Push-to-talk button is required for Apple devices
Fig. 5
push-to-talk button
7. Use clip to install microphone to visor or headliner and route cable down
pillar, under dashboard toward module location and connect to module
"MIC" input.
Fig. 4
Excursive caution when routing microphone so to not damage the
cable. Also ensure no ventilation duct is pointed towards
microphone.
Microphone
8. Connect installation harness
Red wire
vehicle.
Do not use 12V constant supply (battery).
Fig. 6
Tip: Accessory (ACC) is available on ignition harness, interior fuse box etc.
Accessory power is active when ignition is in "ACC" or "ON "positions.
to 12V Accessory supply in