Discount Car Stereo A2DIY-GM3 빠른 시작 설치 매뉴얼 - 페이지 3
{카테고리_이름} Discount Car Stereo A2DIY-GM3에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-GM3 7 페이지. For select 2000-07 gm class ii
페이지 인쇄5. Connect male-to-male cable (See Fig. 4) to AUX input on module (See Fig.
3)
3.5mm male to male cable
6. Connect push-to talk button 1/8" plug to Module "CTR" jack, route button
to front of the dash, remove tape backing and stick to dash (cable is 6ft.
long). (See Fig. 5)
Noteworthy: Push-to-talk button not required for Android devices
because its (2) functions can be performed from included wireless
remote. Push-to-talk button is required for Apple devices
Fig. 5
push-to-talk button
7. Use clip to install microphone to visor or headliner and route cable down
pillar, under dashboard toward module location and connect to module
"MIC" input.
Fig. 4
Excursive caution when routing microphone so to not damage the
cable. Also ensure no ventilation duct is pointed towards
microphone.
Microphone
8. Connect installation harness
Red wire
vehicle.
Do not use 12V constant supply (battery).
Fig. 6
Tip: Accessory (ACC) is available on ignition harness, interior fuse box etc.
Accessory power is active when ignition is in "ACC" or "ON "positions.
to 12V Accessory supply in