3D AEROWORKS TRACER 2000 Panduan Perakitan dan Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Perakitan dan Panduan Pengguna untuk Pesawat terbang 3D AEROWORKS TRACER 2000. 3D AEROWORKS TRACER 2000 19 halaman. Thermal glider

Halaman Cetak

ASSEMBLY INSTRUCTIONS

All faces which are to be glued to other parts need to be given a light sanding (scuff the

surface) to assist with glue adhesion.

Check the fitment of all parts before gluing to make sure a good bond takes place. There

should not be any gaps visible in the joins. Fuse 3-4 and 4-5 are joined using 10mm lengths

of food skewer.

Glue sections of the fuselage together using CA glue. (see images)