3D Hobby Shop 70 AJ SLICK Panduan Perakitan - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan 3D Hobby Shop 70 AJ SLICK. 3D Hobby Shop 70 AJ SLICK 19 halaman.

Attach servo extensions to aileron servos. Use the string installed in the wing to pull the servo wire

through the wing, then install the servo into the wing as shown. Assemble the aileron pushrod as shown

and attach the pushrod to the servo arms and aileron horn with black allen-head screws and lock nuts.

Apply one side of the self-adhesive Velcro tape to the battery tray, the other to your battery. Use the

Velcro strap as a "seatbelt" to hold your battery in position. Always make sure your battery is firmly

strapped down before flight.

Install your receiver as shown on the receiver tray.