- ページ 17
おもちゃ 3D Hobby Shop 70 AJ SLICKのPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。3D Hobby Shop 70 AJ SLICK 19 ページ。
ページを印刷する17
Attach servo extensions to aileron servos. Use the string installed in the wing to pull the servo wire
through the wing, then install the servo into the wing as shown. Assemble the aileron pushrod as shown
and attach the pushrod to the servo arms and aileron horn with black allen-head screws and lock nuts.
Apply one side of the self-adhesive Velcro tape to the battery tray, the other to your battery. Use the
Velcro strap as a "seatbelt" to hold your battery in position. Always make sure your battery is firmly
strapped down before flight.
Install your receiver as shown on the receiver tray.