3D Hobby Shop SLICK 540 Panduan Perakitan - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan 3D Hobby Shop SLICK 540. 3D Hobby Shop SLICK 540 19 halaman.

Install the gear cover plate with CA glue or clear.

Remove the covering on both sides of the fuselage as shown, for the wing spar tube, aileron wire access,

wing retaining screw, and anti-rotation pin. Use either a sharp hobby knife or hot soldering iron to cut the

covering away.

Also remove the covering over the horizontal stabilizer slot as shown, on both sides.