3D Hobby Shop SLICK 540 Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Іграшка 3D Hobby Shop SLICK 540. 3D Hobby Shop SLICK 540 19 сторінок.

Install the gear cover plate with CA glue or clear.

Remove the covering on both sides of the fuselage as shown, for the wing spar tube, aileron wire access,

wing retaining screw, and anti-rotation pin. Use either a sharp hobby knife or hot soldering iron to cut the

covering away.

Also remove the covering over the horizontal stabilizer slot as shown, on both sides.