3D innovations magnetraner-er Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Kebugaran 3D innovations magnetraner-er. 3D innovations magnetraner-er 12 halaman. Extended range

Halaman Cetak

Step 2: Install the Adjustable Leg

Insert the Adjustable Leg into the Bike.

Then use the provided Tool to tighten the

nuts on the fixed leg.

Then screw the Wing Nut into the Bike and

tighten by hand.

For the maximum stability, extend the

Adjustable Leg as far out as possible.

Step 3: Install the Pedals

Tighten the pedals well!!!

Using the bike with loose pedals will

damage the pedal arm threads!

Damaged threads are not covered

under the warranty.

Screw the left pedal into

the left pedal arm

COUNTER-CLOCKWISE.

Screw the right pedal

into the right pedal arm

CLOCKWISE.

Note, the pedals are marked on the

end of the shaft. See the picture to

the right.

Step 4: Install the LCD Display

Plug the Connector into the Display. Then

carefully slide the Display onto the Display

Bracket.