ACOUSENCE dac-pre MKII Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat ACOUSENCE dac-pre MKII. ACOUSENCE dac-pre MKII 17 halaman. Da converter / preamplifier

Halaman Cetak

Phono module, adjustment possibilities

Internally there are adjustment possibilities to the respective sampling system.

Phono-MM capacities from 10pF to 470pf are switchable, with Phono-MC impedances

from 100 to 500 Ohm.

To do this, please de-energize the unit with the toggle switch at the back of the IEC

terminal or unplug the unit. Then unscrew the two upper screws in the front panel

with an Allen key. Now the cover can be lifted on both sides at the front and can be

folded up quasi-like on a hinge that holds it at the back. The top can then also be

removed completely by taking it out of the rear serrations.

You can then see two registers on the phono module, each with six slide switches. To

activate the corresponding value, move the corresponding slide switch in the

direction of the printed value. Capacitances may be activated several times in parallel;

the values then add up. Intermediate values can be formed by activating two

impedances.

Then carefully place the cover again with its serration in the serration of the housing

and carefully close it. Replace the screws and tighten them.