ACOUSENCE dac-pre MKII 사용자 설명서 - 페이지 10
{카테고리_이름} ACOUSENCE dac-pre MKII에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACOUSENCE dac-pre MKII 17 페이지. Da converter / preamplifier
Phono module, adjustment possibilities
Internally there are adjustment possibilities to the respective sampling system.
Phono-MM capacities from 10pF to 470pf are switchable, with Phono-MC impedances
from 100 to 500 Ohm.
To do this, please de-energize the unit with the toggle switch at the back of the IEC
terminal or unplug the unit. Then unscrew the two upper screws in the front panel
with an Allen key. Now the cover can be lifted on both sides at the front and can be
folded up quasi-like on a hinge that holds it at the back. The top can then also be
removed completely by taking it out of the rear serrations.
You can then see two registers on the phono module, each with six slide switches. To
activate the corresponding value, move the corresponding slide switch in the
direction of the printed value. Capacitances may be activated several times in parallel;
the values then add up. Intermediate values can be formed by activating two
impedances.
Then carefully place the cover again with its serration in the serration of the housing
and carefully close it. Replace the screws and tighten them.
10