CubuSynth VCFA Membangun Manual - Halaman 7

Jelajahi secara online atau unduh pdf Membangun Manual untuk Pedal Musik CubuSynth VCFA. CubuSynth VCFA 14 halaman. Multimode vcf with lp,hp and bp outputs and integrated vca
Juga untuk CubuSynth VCFA: Manual (5 halaman)

Halaman Cetak
CubuSynth VCFA - Build Guide
STEP 6 (Main PCB)
Transistors
4
Take the 2N3906 transistors, put them in place and make sure
the orientation is correct. The outline of the transistor has to
match with the silkscreen on the PCB like shown below.
Then turn around the board an solder.
STEP 7 (Main PCB)
Power header
1
Turn around the board and place the Pin
Header for Power like shown.
Orientation of the Power Header is very
important to be able to insert the power
cable the correct way.
Put some tape, to hold it in place while
soldering from the other side.
Page 7
2N3906
Q4,Q3,Q2,Q1
EURORACK10
SV1
PCB V1.2 Sept 2022