CubuSynth VCFA Membangun Manual - Halaman 9

Jelajahi secara online atau unduh pdf Membangun Manual untuk Pedal Musik CubuSynth VCFA. CubuSynth VCFA 14 halaman. Multimode vcf with lp,hp and bp outputs and integrated vca
Juga untuk CubuSynth VCFA: Manual (5 halaman)

Halaman Cetak

CubuSynth VCFA - Build Guide

STEP 10 (control PCB)

Resistors

Now take the other (control-) PCB, and place and solder the

resistors.

Here is the list of parts and a picture with all resistors in

place.

STEP 11 (Main & control PCB)

Pin headers

Take the 1x6 Pin Headers (Male) and Sockets (Female) and put them together. Place them on the

Main PCB, with the female header down, but don't solder yet!

Now take the other PCB and fit it on top, so the pins of the male headers are showing through.

Screw the PCBs together with the M3 screws, while soldering the pin headers on both sides (both

PCBs).

Then remove the screws from the Main-PCB. You can let the Standoffs fixed to the control-PCB.

The next page shows pictures of this step.

Page 9

R35,R34,R33,R47

100k

R45,R38,R22,R5,R48,R14

330k

R24,R3

HDR-F-2.54_1x6

H2,H1

HDR-M-2.54_1x6

J9,J7

PCB V1.2 Sept 2022