Cucina GCRMC-M90E Buku Petunjuk - Halaman 13

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Dapur Cucina GCRMC-M90E. Cucina GCRMC-M90E 18 halaman.

Cleaning & Maintenance

Before cleaning your multi cooker, make sure that it has cooled down and is plugged

from the mains socket. Use a soft cloth with warm soapy water.

We recommend you clean your multi cooker after each use.

DO NOT use abrasive materials, solvents or cleaning methods as this will

damage the multi cooker.

DO NOT immerse the multi cooker in water or wash under running water.

The steam valve, inner aluminium lid and inner pot MUST be cleaned after each use.

To clean the inner lid:

1. Open the lid

2 .Press the 2 plastic holders on the inner side of the lid pointing towards the centre

until open.

3. Gently pull the inner lid towards you to release for the upper lid.

4. Wipe the surfaces on both sides with a damp cloth and warm soapy water. Use a

clean cloth the rinse and dry thoroughly.

5. Replace back into the upper lid (reverse procedure for removing) The steam valve

is located on the top lid of the multi cooker. See the product overview page which

highlights the location.

The steam valve consists of 2 parts: the cover and the main part. To clean the steam

valve:

1. Take the cover of the steam valve off by pulling it gently up and towards you.

2. Inside the removed cover, turn the main part of the steam valve anti-clockwise.

Lock and unlock are illustrated on the valve.

3. Take the rubber sealing ring out, wash all parts with warm soapy water, dry

thoroughly and assemble back together, following the removing procedure but in

reverse.

DO NOT twist or stretch the rubber sealing ring to avoid deformation

Condensation may accumulate in the cavity around the bowl and in the condenstion

container at the back of the multi cooker.

1. Open the lid and remove the inner pot. Lift the front of the multi cooker, if required,

this will enable the condensation to flow down to the container.

2. Pull out the container and pour out the fluid.

3. Rinse the container and dry thoroughly before putting back into place.

4. Remove the condensation from the cavity around the inner pot by using a dry

cloth.