AromaMist AI-5 Panduan Instalasi dan Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Pompa Air AromaMist AI-5. AromaMist AI-5 15 halaman.

E. Control (Aroma Switch)

1. Location

Determine the desired installation location for the aroma switch control. The

aroma switch has a 60' integral low voltage cable and is designed to be installed

inside or outside the steam room as a matter of personal preference.

If aroma switch is installed inside the steam room, it must be located 4-5 feet

above the floor, on a vertical wall, convenient for user on/off operation and away

from steam head or steam emissions.

NOTE: For convenient use during steambathing, an aroma switch mounted

inside the steam room is most preferred.

2. Mounting Aroma Switch

Make a 1⅝" diameter hole in desired control location. Route the aroma switch

integral control cable from the wall cut out to the

supply module. With a clean and dry mounting surface, remove the peel-off

paper from the back of the aroma switch, run a thin bead of 100% clear silicon

completely around the aroma switch mounting flange and press the control

against the wall until the adhesive sticks. Connect the aroma switch cable to the

3-pin terminal on the power supply module to complete the aroma switch

installation.

Aroma Switch (Front View)

AromaMist

Aroma Switch (Back View)

Page

pump power