Dish TV S9040DVD Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemutar DVD Dish TV S9040DVD. Dish TV S9040DVD 14 halaman. Dvd/dvb-s2 combo player with hdmi output

Halaman Cetak

4.7.4 PVR Configure

[Record Device]: Select the disk for the record.

[Format]: Format the selected disk.

5. User Interface of DVD Playback

Press the SOURCE button on the remote control under DVB showing mode,

the unit will go to the DVD playing mode, then press the SETUP button on the

remote control, the SETUP MENU will be displayed.

After accessing the setup menu, press the direction buttons for up and down

movement to select an item desired, then press the OK button to confirm.

Press LEFT direction button return to the menu of upper level.

To exit the setup, press the SETUP button again. In the SETUP MENU, you may

choose any of the following options as you like.

5.1 LANGUAGE SETUP

Select Language in the setup menu, and

display the Language submenu:

(1).OSD Language

Use this item to select the language of the

setup menu and screen display.

(2).Subtitle

This option provides the preset subtitle

language.

(3).MPEG4 Subtitle(optional)

Select different MPEG4 subtitle encoding option.

Note: Not all players support this item.

(4).Audio

Select the built-in disc dubbing language options.

(5).DVD Menu

This option provides the film's menu language options.

5.2 VIDEO SETUP

Select Video in the setup menu, and display the Video submenu:

(1).Aspect Ratio

Select the aspect ratio.

Notes: The image display ratio is related to

the recorded disc format.

Some disc can not display images in the

aspect ratio you choose.

If you play a disc recorded in 4:3 format on

a wide screen TV, black bars will appear

on the left and right side of the screen.

You must adjust the screen setting

depending on the type of the television you

have.

(2).TV System

Select the different TV system.

Note: The DVD player setting should be matched to your TV set. For more information of

output format, refer to the instructions or your TV set.

(3).Video Out

Select the video output format wanted.

Note: Only HDMI DVD player has "HD" selection.

(4).HD Resolution (optional)

After you set the video output to HD output, you can choose the resolution of HDMI output.

Note: Only HDMI DVD player has this item.

5.3 AUDIO SETUP

Select Audio in the setup menu, and

display the Audio submenu.

(1).Digital output (Optional)

Adjust the audio output on Coaxial ports to

work in harmony with the audio

equipment (e.g. receiver, amplifier)

connected to the player.

Off Digital audio output is disabled.

PCM Transfer stereo 2 channels signals