Dish TV S9040DVD Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemutar DVD Dish TV S9040DVD. Dish TV S9040DVD 14 halaman. Dvd/dvb-s2 combo player with hdmi output
Halaman Cetak
Add to program: Choice the track press Add to program to add the track of the
program play directory.
Clear program: In the complete stop state(press the STOP button twice), choose
the track press Clear program to delete the track of the program play directory.
7. PICTURE CD PLAYBACK
The PICTURE CD disc has such a directory structure as shown in the following picture.
Press Direction key to choose the root
directory and then press OK button to
enter
into the sub directory. Press Direction key
to choose the desired picture and then
press OK or PLAY to enjoy the picture.
If you want to return to the upper menu,
press Direction key to choose the icon
and press OK button.
Image rotation
In picture play state, press Direction key to rotate the picture, press ANGLE button to
change the picture scan mode.
8.Troubleshooting
If you experience problems with this receiver or its installation, in the first instance please
read carefully the relevant sections of this User Manual and this Troubleshooting section.
Problem
Potential Reasons
Standby light not lit
Mains lead unplugged
Mains fuse blown
No signal found
Dish is disconnected
Dish is damaged/misaligned
No picture or sound
Viewing incorrect TV input
Tuned
channel
Mosaic
blocks
in
Dish LNB may be faulty.
picture
or
picture
freezes
Scrambled
channel
Channel is a Pay channel
message
Forgotten
channel
lock code
No
response
to
Receiver off
remote control
Handset not aimed correctly
Front panel obstructed
Remote control batteries are
inserted incorrectly
Handset batteries exhausted
After
moving
the
The Dish feed may come
receiver to another
through a distribution system
room,
find
can't
which may reduce the digital
receive
the
digital
signal now received by the
reception
receiver
Bad
Disc
is
Ensure the disc is not warped, damaged or deformed.
displayed
Ensure the disc is not badly stained or damaged.
Ensure the disc format is compatible with the player.
Please check whether you have tried to play a software CD.
If so, please restart the player.
No disc is displayed
Ensure you have put the disc on the tray.
Ensure the disc is not upside down.
Ensure the disc is not distorted, stained or scratched.
11
What to do
Check mains lead
Check fuse
Check Dish lead
Get
Technician
Check Dish
Press the input button
on your TV remote
to
digital
teletext
Retune
to
channel
Have technician Check
you dish setup
Select an alternative
channel
Contact Supplier for
master code
Plug in and turn on
receiver
Aim handset at front
panel
Check for obstructions
Check
direction
Replace remote control
batteries
Try a direct feed from
the Dish
to
another
batteries