Dish TV S9040DVD Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemutar DVD Dish TV S9040DVD. Dish TV S9040DVD 14 halaman. Dvd/dvb-s2 combo player with hdmi output

Halaman Cetak

Goto X: goto the position calculated from the local and satellite positions.

Add satellites: Press Red to add a new

satellite, in which you must input an unique

longitude, and edit the satellite's name with

soft keyboard.

Edit satellites: Press Green to edit the

focused satellite.

Delete satellite: Press Yellow to delete the

focused satellite. Press OK to confirm.

Single Satellite Scan: Press Blue to pop the

menu of scanning settings.

Scan Mode: Press Left/Right to select

default, which scan the default

transponders built in, Blind Scan and

NetWork, which scan with NIT on.

Crytped: Press Left/Right to select All

Channels or FTA Channels;

Service Type: Press Left/Right to select

ALL , DTV or Radio.

Press OK to start scanning with the above

settings.

Multi-Satellites Scan: Press OK to select satellites with the mark"  ",then press

blue to pop the menu of scanning setting. After Configuring like single satellite scan,

press OK to start multi-satellites scan.

Channel Search

Scan the satellites or Transponders according the configurations.

Blind Scan

First scan the band to get the transponders which can be locked. After gathering

all Transponders, Scan the transponders one by one to get the programs.

4.3.2 Transponder

Press GOTO to switch the list to show transponders of the focused satellite. Also

you can press GOTO to switch back to satellites' list.

Add transponder: Press Red to add a new transponder. It can't save an existing

TP under the same satellite.

Edit transponder: Press Green to edit the focused transponder. It can't save an

existing TP under the same satellite.

Delete transponder: Press Yellow to delete the focused transponder. Press OK